Standards:

FORD BI 107-5

Applications:

Product Information:

Specification:

The thermal shock tester consists of an electromagnetism steam generator (type 100). The equipment is easy to operate, durable and highly cost effective. The tester can produce quantitative high temperature steam at the outlet. This instrument is designed for the professional thermal shock test.

Features:

This device is suited to all the 220V/50Hz output voltage and 6A current.

Steam generator, weight: 100 pound, flow rate: 1.0 gpm, the max temperature: 340F.

This steam generator (type 100) can connect to the existing water pipe.

Fuel capacity: 100 gallon.

Fuel of burner: kerosene (recommend).

Motor of burner: 1/5 HP, 115V/50Hz, 1ph,1750 rpm;

Heater coil: 7/8 inches (outer diameter) x 154 inches, spiral copper tube.

Oil bath pump

Motor of pump: 3/4HP, 115V/50Hz, 1ph, 1750 rpm;

2 gallon stainless steel, continuous supply, float control.

Handheld digital thermometer.

The test fixture of precision measurement kinetic head.

Cutting fixture: for the cutting of the sample.

The blasting temperature probe (type K) is put into the fixture to measure the blasting temperature.

Omega handheld digital thermometer is connected to the blasting temperature probe (oC/F, accuracy 1%, Max/Min function).

The fixture can fix the steam gun at proper angle and position and fix the sample at the middle of it.

The readable front control panel: digitally display the steam temperature and system pressure; water flow gauge and flow control valve.

Precise fuel supply pressure gauge.

The customized steam gun can demonstrate the crack of the steam hose.

This instrument includes all the accessory for the thermal shock test and equipment calibration.

The installation guide video.

The training video of the thermal shock test calibration and introduction.

The instrument weight: 430 pound.

The shipping weight: 455 pound.

The instrument size: 55 x 23 x 27 inches (L x W x H)

The package size: 60 x 36 x 60 inches (L x W x H)