|

Search keywords：

product name, product type, model number,
test method, manufacturer, technique, application

Home > Products > Category > Filter Material Tester > > Complete Filter Cartridge Analyzer

Complete Filter Cartridge Analyzer

BACK
Complete Filter Cartridge Analyzer

info@standard-groups.com Quote

Share

Standards:

Applications:

Product Information:

Introduction

Complete Filter Cartridge Analyzer automatically analyzes the perforation of the entire filter cartridge of various geometries. The complete filter cartridge analyzer is ideal for quality control and R & D environments. It is fast, accurate and non-destructive. And it is used in any industry where the filter cartridge is used. The specific examples include automation, filtration, nonwovens and pharmaceuticals. The test consisted of foaming point, pore size distribution, average pore size, gas, liquid and Frazier permeability, and filter integrity. The design of the sample chamber allows the use of a wide range of diameter and length of the filter cartridge. With a non-destructive test for 10 minutes,  complete filter cartridge analyzer is ideal for quality control and R & D research.
 
Application
The complete filter cartridge analyzer is ideal for quality control and R & D environments. The device is fast and accurate and non-destructive. It is used in any industry where the filter cartridge is used.
1. Automotive Manufacturing                                 6. Detoxification
2. Pharmaceutical Industry                                    7. Nonwovens
3. Biotechnology                                                      8. Pollution control
4. Filter                                                                       9. Sintered metal 
5. Ceramics

Operation Principle
Place a fully wetted filter cartridge in the sample chamber and seal the sample chamber. And then flow the gas to the filter. When the pressure reaches the point at which the capillary action can be overcome in the hole (maximum hole), regard the point as the bubble point. After determining the bubble point, increase the pressure and measure the flow until all the holes are empty and the filter element is considered dry.
 
Features
Þ Windows-based software handles all control, measurement, data collection, and report generation.
Þ complete manual control also possible.
Þ Compatible with Windows 95 or higher.
Þ During the operation, the current chart test shows the test status and the results
Þ Non-destructive test.
Þ The test length is about 10 minutes for each sample.
Þ accept a variety of geometry of the complete filter cartridge.
Þ Transparent sample room for visual judgment.
Þ Need minimal maintenance
Average pore size                                             Pore size distribution
Foaming point (maximum hole)                    Integrity
Gas and liquid                                                  Frazier Permeability
Gurley                   
Head test

Technical Parameters
 
Items Parameters
Pore size range 0.013-500um
Permeability range 1*10-3 –50 Darcies
Pressure range 0-500Psi
Requirements of compressed air Clean and dry, not flammable, non-condensing
Pressure sensor test range 0-500Psi
Resolution 1/60,000 of full scale (1 part in 60,000)
Precision 0.15% of reading
Mass flow sensor 0-10cc/min-5000L/min
power supply 110/220VAC，50/60 Hz（others Available)
Dimension 30*30*18.5 inch
Weight 150lbs
Sample size Up to 36 inches, 6 inches in diameter
 
 

Leave Message