Search keywords：
product name, product type, model number,
test method, manufacturer, technique, application
-
Cone Calorimeter
The import of American VTEC, cone calorimeter ultra high cost performance
more
-
Digital Elmendorf Tearing Tester
Pendulum method test material tear strength, operating more simple, more accurate data
more
-
ZwickiLine Materials testing machines
Top of the world's leading universal material testing machine
more
Automated Filter Tester 30
BACK
Standards:
USA commercial respirator regulation (42 CFR part 84) European EN 143, ISO 16900-3 and related respirator standards? View EN 143 Compliance Report (US) View EN 143 Compliance Report (DE) ISO 23328-1 (testing filters for anaesthetic use) JMOL (Japanese respirator standard)
Applications:
Product Information:
The Automated Filter Tester Model 30A continues to be the best solution for testing particulate respirator filters, disposable filtering face pieces, and a wide assortment of filter media. The filter testers have been used in quality control and manufacturing by leading filter and filter media manufacturers and test centers around the world for more than 20 years.
Based on established model 30. the world's most-used filter tester, model 30A now offers higher sensitivity and resolution - up to 99.9999 percent efficiency has been produced with Emery oil at concentrations of 200 mg/m³ - at a lower cost of ownership due to the new serviceable photometers inside. The model 30A features a high degree of automation and self-diagnostics that greatly simplifies operation, increases throughput, and improves overall measurement performance. Whether looking for a stand-alone tester to check a few filters per day or need to integrate a tester in an automated, high-volume production line, the model 8130A is up to the challenge.
Features and Benefits：
Complies to more standards than any other filter tester
Salt and oil testing in one unit
Highly consistent test results
New user-interface and data recording options
Customizable fully automated testing sequences
Ergonomic design
Reduced cost of ownership with new serviceable photometers
Worldwide service and support
Technical Parameters：
| Items | Parameter |
| Application | Load and quality control |
| Max Efficiency | 99.999% |
| Aerosol Type | DOP/PAO/DEHS/Paraffi/Others Oil Aerosol、Salt |
| Aerosol Generation | Atomizing |
| CMD | 0.2μm（Oil）or 0.75um(NaCl) |
| GSD | ＜1.6（Oil）or <1.86(NaCl) |
| Flow Rate | 15-100L/min |
| Resistance | 0-150mm H2O(0-1470Pa) |
| Particle Detect | Scatter Photometer |
| Measurement Time | 10 Sec. |
| Data Report | LCD，RS-232 |
| Operation | Independent tewster、automatic production line |
| Standard compliant | US 42 CFR part 84.EN 143.JMOL，ISO 23328-1 ISO 16900-3 |
| Power Supply | 115VAC、60Hz，10A或230VAC，50Hz，5A |
| Compressor Air | 80psig，7scfm（550kPa，198std.L/min） |
| Dimension | 70cm x 70cm x 147cm（28in, x 28in.x 58in.） |
FAQs
Q1: What is the Automated Filter Tester 30 used for?
A: It is used to evaluate the filtration performance of compatible filter materials.
Q2: Which filter materials can be tested?
A: It can test suitable filter media and filtration materials, depending on the equipment configuration.
Q3: What parameters can it measure?
A: Depending on the test method, it can evaluate filtration efficiency, pressure drop, and airflow resistance.
Q4: Which industries use this tester?
A: It is suitable for filter manufacturing, air filtration, automotive, and industrial filtration applications.
Q5: What are the advantages of automated filter testing?
A: Automated testing improves testing consistency, reduces manual operation, and enhances testing efficiency.
