Standards:

GB/T2812 - XXXX, GB 2811-2019

Applications:

Mainly used for the performance test of safety helmets against molten metal splashing.

Product Information:

The Tester for Safety Helmets Against Molten Metal Splashing, Impact and Penetration Resistance is designed to evaluate the protective performance of safety helmets against molten metal splashing, impact, and penetration hazards. It supports safety helmet quality control and performance verification according to relevant testing standards.

Parameters：

1. Pouring height: The standard height is 225±5mm, and it is adjustable with an adjustment range of 100mm.

2. Pouring temperature: 0 - 1800°C, with the standard temperature being 1400±20°C.

3. Molten metal: A 150±10g iron part with an iron content of not less than 93%, melted into a liquid.

4. Cooling methods: Water - cooling for the control system and air - cooling for the test chamber.

5. Instrument dimensions: 1250*750*1350mm.

6. Instrument power supply: 380V, 50HZ, 25KW

FAQs：

1. What is the purpose of this safety helmet tester?

It evaluates the resistance of safety helmets to molten metal splashing, impact, and penetration.

2. What types of helmets can be tested?

It is suitable for industrial safety helmets and applicable protective headgear.

3. What tests does the equipment perform?

It performs molten metal splashing, impact resistance, and penetration resistance tests.

4. Which standards does it comply with?

It can be configured to meet relevant safety helmet standards, such as EN 397 and other applicable specifications.

5. Why is molten metal splash testing important?

It helps assess helmet protection against molten metal hazards and supports product safety verification and quality control.