Standards:

NF P 92-505, EU 95/28/EC，ECE R118

Applications:

Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined.

Product Information:

The Thermal Radiation Droplet Tester is used to evaluate the behavior of materials when exposed to thermal radiation, including molten or flaming droplets generated during combustion.

Features:

Automotive interior materials droplet characteristic tester is according to appendix 7 of ECE R118 to determine the melting characteristics of materials. With mechanical and electrical equipment control box body, cold plate with American equipment - Orange shaped paint surface treatment, body inside and outside resistance to acid and alkali resistance, long service life.

Specification:

1.Sample holder: inner diameter of 118 mm stainless steel ring, inside diameter of 0.70 mm and a mesh diameter is 2.10mm into the stainless steel mesh .Sample installation height can be adjusted

2.Sample size: 70 x 70 (mm), the thickness is not more than 13mm

3.Residue container: inner diameter 118mm, depth 12mm

4.Radiant heat source power: 500W

5.Heat radiation: diameter 100mm± 5mm transparent glass plate

6.Radiator heat radiation 30KW/m2. up to 100KW/m2 Max;

7.Radiator heat radiation linear adjustable; radiant heat is adjusted automatically by power control

8.The radiation bracket can be rotated, the rotation angle is greater than 90 degrees, and the sample is convenient to be installed, and the radiation cone can move up and down.

9.The distance from the sample shelf of the residue container: 300mm;

10.Surface distance from the surface of the sample to the radiation source: 30mm

11.Heat flux range: 10W/cm

12.Size: 1120mm * 520mm * 1250mm (W*D*H), exhaust hole diameter 100mm

13.All the tools are made of stainless steel, beautiful, corrosion resistance

14.Power supply: AC220V, 50Hz, maximum power 1000W

FAQs

1. What is a Thermal Radiation Droplet Tester used for?

It is used to evaluate the droplet behavior and fire performance of materials under thermal radiation.

2. What materials can be tested?

It is mainly suitable for textiles, plastics, insulation materials, and other combustible materials.

3. What does the test evaluate?

It can evaluate flaming droplets, molten material behavior, ignition, and combustion characteristics.

4. Why is droplet testing important?

It helps assess whether burning or molten droplets may contribute to fire spread or create additional hazards.

5. Where is this tester commonly used?

It is commonly used in textile, building material, protective clothing, and fire safety testing.