What measure should be observed by the operating Universal Tensile Test Machine

 

 

Universal Tensile Test Machine should be operated by professionals familiar with equipment operation and maintenance. This can effectively reduce the risk of operational errors and equipment abnormalities.

 

 

Tests should be conducted in suitable environmental conditions, including appropriate indoor temperature, humidity and dust-free environment. Some specific environmental conditions may affect the accuracy of the test results.

 

Before the test is performed, it should be checked whether the test equipment is in good condition, whether the calibration has been completed, and confirm that all equipment parameters, measurement units and test mode are set correctly.

 

 

In the course of operation, appropriate security measures should be taken, such as wearing goggles, gloves and long-sleeved clothing, etc., to prevent possible splash and sharp material damage during the machine operation.

 

 

According to the test requirements, the sample is installed correctly. When loading the sample, ensure that it is firmly fixed and prevent the sample from falling off or skewing during the test.

 

 

It is strictly followed by the steps of the operating manual. Do not operate at will to prevent damage to the device without knowing the operating steps and the operating interface. Avoid repeating the test without clarity of the test results.

 

 

Maintain and calibrate equipment regularly. The equipment should be cleaned after use. According to the frequency of use of the equipment, calibration is completed regularly according to the recommendations of the manufacturer to ensure the accuracy of the data.

 

 

Accurately record and store all test data and perform the necessary analysis, discover and solve problems, improve test operations and methods.

 

 

Each operator should understand and be able to operate emergency shutdown switches, and can immediately protect the safety of itself and the equipment with an emergency downtime when the equipment is abnormal or irregular operation.

 

With these operating procedures, you can use Universal Tensile Test Machine more effectively to ensure that your trials are both safe and accurate.