Technical characteristics of MMT liquid moisture management tester

 

　　Applicable standards:

 

　　 AATCC 195, GB/T 21655.2

 

  The main parameters:

 

　　 1. Communication interface: wireless WiFi;

 

　　2. Voltage and current: 110V~230V50Hz/60Hz0.5A;

 

　　3. Test environment: 18°Cto40°C, 20% to 80% (non-condensing);

 

　　 4. Pumping time: 20sec;

 

　　 5. Test solution delivery volume: 0.2g+/-0.01g (users can fine-tune);

 

　　 6. Test liquid conductivity: 16mS+/-0.2mS;

 

　　 7. Test pressure: 960grams.

 

　　Measurement parameters:

 

　　 1. Upper/bottom soaking time (WTT/WTB);

 

　　 2. Upper/bottom layer suction speed (TAR/BAR);

 

　　 3. Upper/lower diffusion radius (MWRt/MWRb);

 

　　 4. Upper/bottom liquid sweat diffusion rate (TSS/BSS);

 

　　 5. Accumulate one-way transfer capability (R);

 

　　 6. The overall liquid moisture absorption and diffusion capacity (OMMC).

 

　　Technical characteristics:

 

　　 1. All metal shell, excellent anti-interference performance;

 

　　2. Start the test with one button. After clicking start, the motor will automatically drive the test head to the specified position. The built-in pressure detection device will automatically stop when the pressure is fixed, start the test, and automatically return after the test is over;

 

　　3. Improved droplet injection system, accurate and stable dripping; the unique reverse pumping system can be reversed to pump the remaining salt water in the infusion pipe back to the storage tank to prevent salt water crystallization from clogging the pipe.

For more information, please visit us at: https://www.qinsun-lab.com/index.html
Or write email to us: info@qinsun-lab.com