Requirements for the test of burning performance of pajamas

The flame-retardant performance of textiles is an important indicator in the textile testing industry. The textile burning test has different requirements for different materials and types of clothing. Especially for textiles with high flame-retardant requirements, special treatment is required. At present, as far as pajamas are concerned In view of the different requirements of different types of clothing stamp collectors, Shanghai Standard Group will briefly introduce you to the requirements of the pajamas burning performance test experiment.

 

Fabric's burning characteristics requirements

 

Flame spread time: When tested in accordance with ISO6941, the average value of flame spread time in the length and width directions should be ≥12 seconds, and a single value should be ≥10 seconds. This requirement should be met before and after washing
 

 

Surface burning time of raised or raised fabric (fabricswithpileornap): When tested in accordance with ISO10047, the surface burning time of raised or raised fabric, including Basque, after washing is 10 seconds or more. If the lining of the clothing is raised or raised fabric and does not meet the requirements of surface burning time, the lower edge of the clothing should include sleeves of any length, all openings below the waist, and trousers, which extend to the inside of the clothing at least 2.5 The place at cm should be a fabric without fuzz or fuzz.

 

 

If the combination of clothing fabric and neckline accessories meets the requirements of flame spread time and surface burning time, their use is not restricted, otherwise any other width and length of the clothing neckline are restricted.