Atlas xenon lamp aging test chamber how to maintain the compressor system?

Xenon lamp aging test chamber how the refrigeration methods are mainly air-cooled and water-cooled two, refrigeration compressor as the core components of the test chamber will directly affect the performance of the equipment, so the maintenance of the compressor should not be ignored. Under normal circumstances, sudden damage to the equipment is rare, but if the test chamber is not in a long-term shutdown during the state to be used, its refrigeration compressor will also be in a long-term shutdown, so more maintenance work is needed to ensure the life of the compressor and the normal use of the machine when it is turned on again.

 

How to maintain the Atlas xenon lamp aging test chamber and maintain the compressor?

 

We must first ensure that the Atlas xenon lamp aging test chamber has an excellent use of the environment, a childish use of the environment must meet the following six requirements.

 

1, the ground is flat, well ventilated, does not contain flammable, explosive, dust and corrosive gases and other test chamber restrictive items;

 

2, no strong electromagnetic radiation sources near the laboratory;

 

3, test equipment around the maintenance space left enough;

 

4, temperature: 5 ℃ ~ 30 ℃ (the average temperature within 24 hours ≤ 30 ℃);

 

5, relative humidity: ≤ 85% RH (in summer, you need to open the air conditioning to ensure that the laboratory temperature and humidity);

 

6、Air pressure: 86～106KPa.

 

How to care for and maintain the Atlas xenon lamp aging test chamber compressor it?

 

Second, in order to ensure that the test chamber has a good use of the premise of the environment, we should also be through the following points to the equipment compressor maintenance.

 

1, should ensure that the laboratory is well ventilated and no dust, but also to keep the surface of the equipment compressor clean, if not used for a long time test chamber should try to place it in a dust-free space;

 

2, the workplace voltage must be stable, if the voltage is unstable will lead to too much or too little current, a long time running in this environment will cause great damage to the compressor, it is recommended that the use of voltage regulators connected to the test chamber; when you site voltage is unstable, do not do the test.

 

3, do not frequently start the compressor in the process of use, the compressor start interval to be more than 15 minutes.

Test chamber using the ambient temperature and humidity for: ambient temperature of 5 ℃ - +28 ℃

 

For more information about the Atlas xenon lamp aging test chamber price, please leave a message!