What testing equipment is available for luggage and bags?

From the consumer's point of view, luggage and bags must not only look good, but also be of good quality. The quality of luggage and bags is determined by professional testing equipment.

 

So, what are the testing devices for luggage and bags? There are several common ones as follows.

 

1. luggage and bags falling hammer impact tester QS-D120

 

This instrument simulates luggage and bags in transit falling, ramming, tumbling and other situations, the weight of the impact head, the weight of the prescribed impact head, adjust a certain height, so that the impact head free fall, impact samples, test the degree of damage to luggage and bags.

2.luggage and bags wheel wear resistance tester QS-D125

 

This apparatus is suitable for small wheels for abrasion test, such as luggage, stroller, stroller .... It can measure the abrasion resistance of the wheel material and the overall result of whether there is wear and deformation, the test results can be used for reference improvement.

 

3.luggage and bags wheel down stairs tester QS-D128

 

The luggage and bags wheel down stairs tester is designed to simulate the road conditions often encountered in the daily life of luggage, including up and down stairs and outdoor concrete stairs. The main purpose of this tester is to test the overall performance of the wheels, to understand the adaptability of the product and to achieve control and prevention.

 

4. suitcase walking bump abrasion tester QS-D113-1 QS-D113-2(double head)

 

This apparatus is suitable for testing luggage and bags with wheels attached to it. It tests the heat resistance, damage and wear of the wheels by testing the mileage and speed, and detects the abrasion resistance of the wheel material and whether the overall structure of the case is damaged or deformed, and the experimental results can be used for reference improvement.

 

5. luggage and bags trolley bar reciprocating fatigue tester QS-D115-1

 

This apparatus is used for the reciprocating fatigue test of luggage and bags ties. During the test, the specimen is stretched to test the linkage gap, looseness, deformation and failure of the tie rod caused by the tie rod.

 

6. luggage and bags simulated lifting and placing tester QS-D118

 

The luggage and bags simulated lifting tester is used to test the durability of the handle and to detect whether the material is damaged or falls off during the lifting process, the product data can be used as a reference for judging standards.

 

7. luggage and bags zip reciprocating fatigue tester QS-D126

 

The luggage and bags zip reciprocating fatigue tester is an instrument to test the quality of zips.

 

8. zip head comprehensive torque tester QS-D127

 

This machine is used to test the strong twist of zip head. To test, the pulling piece and the zip head are fixed separately and twisted at a speed of 1.5 revolutions per minute. After they have been damaged, the display will retain their maximum torque value. The product data can be used as a reference.

 

9.luggage and bags oscillation impact tester QS-D114-2

 

This machine is used to test the resistance of luggage handles, stitching and overall structure to oscillatory impact.

 

In addition, it also involves the corrosion resistance of hardware accessories, rubbing colour fastness, etc. The equipment configured are salt spray corrosion tester and rubbing colour fastness tester.