How to use the Packaging matirial bursting tester: A step-by-step guide

The Packaging matirial bursting tester is a device used to test the strength and endurance of packaging materials. It measures the bursting point of a packaging material under a certain compression force to determine its endurance during transport and storage.

 

The tester usually consists of a pressure system and a data logging system. During the test, the packaging material being tested is placed in a closed test chamber and then a certain amount of pressure is applied until it bursts. The data logging system records the pressure and time during the test, and calculates the burst point of the packaging material.

This tester is widely used in the food, pharmaceutical and cosmetic industries to ensure the safety and stability of products during transportation and storage.

1. Prepare the test sample: Cut an appropriately sized circular sample from the desired packaging material and ensure that its dimensions meet the standards specified by the instrument.

2. Install the test sample: Place the test sample in the center of the instrument fixture and clamp it with the fixture to ensure that the sample is firm and will not slide.

3. Set the test parameters: According to the test requirements, set the test parameters on the instrument control panel, including test pressure, test time, etc.

4. Start the test: Press the start button on the instrument control panel to start the test program.

5. Observe the test results: Observe the data changes during the test. When the test reaches the set end pressure, the test program will stop automatically. At this time, you can view the test results, including pressure, rupture value, etc.

6. Repeat the test: If necessary, you can repeat the test to get more accurate results.

7. Remove the sample: After the test is finished, remove the test sample from the fixture and put the fixture back in place.

8. Clean the instrument: Clean and disinfect the surface of the instrument and the fixture for the next use.

 

In conclusion, using Packing matirial bursting tester requires strict operational steps and ensures the accuracy and consistency of the test. Before using, you should read the instrument instructions in detail and set up and operate it according to the requirements of the test.