5 Problems Everyone Has With CIRCULAR LOCUS PILLING TESTER - How To Solved?

The circular track pilling tester is a device used to test the pilling properties of textiles. There are a number of common problems that can be encountered when using this tester and these are described below along with their solutions.

 

 

Solution: The first thing to check is whether the tester is calibrated. If the tester has not been calibrated, it will need to be calibrated. Secondly, the tester needs to be checked to see if it is being used according to specification. If it is used incorrectly, this can also lead to inaccurate test results. Finally, if the test results are still inaccurate, consider replacing the tester.
 

 

 

Solution: If the test instrument is faulty, you can first check if there is a power supply fault or a wiring fault. If there is no problem with the power supply or wiring, you need to look for other possible causes of the fault, such as faulty sensors, faulty controllers, etc. If the fault cannot be resolved, the supplier can be contacted for repair or replacement.

 

 

Solution: If noise occurs during the test, you can first check whether the tester is placed smoothly, if not, it will lead to noise during the test. Secondly, you need to check whether there are foreign objects inside the test instrument or loose parts and other problems. If the noise problem cannot be solved, the supplier can be contacted for repair or replacement.

 

 

Solution: The test instrument needs to be cleaned regularly to ensure the accuracy of the test. To clean, switch off the power and then wipe the test instrument with a cleaning cloth on the housing, sensors and other parts of the instrument. Be careful not to use corrosive cleaning agents or water to clean the test instrument directly.

 

 

Solution: When testing the pilling performance of textiles, test data needs to be recorded for subsequent analysis and comparison. Test data can be recorded using computer software or manually and saved to a computer or other storage device. Care should be taken to protect the security and privacy of the data to avoid disclosure.

 

In conclusion, the Round Track Pilling Tester is an important piece of textile testing equipment, but problems may be encountered during its use. If problems can be identified and the correct solutions taken in time, the accuracy of the test results and the proper use of the test instrument can be ensured.