|
NewsInformation Center
Home>News > > The Official Guide to ici pilling and snagging friction testing machine

The Official Guide to ici pilling and snagging friction testing machine

2023/05/22

Share: 

Share
The following is the official guide for the ICI pilling and snagging friction tester:
 
Instrument introduction:
ICI pilling and threading friction tester is an instrument used to test the pilling and threading performance of the fabric surface. The instrument uses a high-speed rotating wear head to rub against the surface of the sample, resulting in pilling and threading. By calculating the number and grade of pilling and threading, the wear resistance and appearance quality of the fabric are evaluated.
Sample preparation: Select a fabric sample that meets the standard requirements, cut it into an appropriate size as required, and clean it to remove impurities and pollutants on the surface.

ICI pilling and snagging friction test
 
Instrument debugging:
According to the requirements of the manual, install the appropriate test head and load, and adjust the test parameters, such as the rotation speed of the wear head, the size of the load, and the test time.
 
Conduct the test:
place the sample on the test bench, and start the testing machine according to the instructions. During the test, observe the pilling and threading on the surface of the sample, and record the test data. Often multiple tests are required to obtain reliable means and standard deviations.
 
Data processing and result analysis:
According to the test data, the number and grade of pilling and snagging are calculated, compared and analyzed. Test results and conclusions can be displayed by drawing charts and making reports.
 
When conducting the ICI pilling and spinning friction test, the following points need to be paid attention to:
 
The selection and preparation of samples should meet the standard requirements to ensure the reliability and comparability of test results.
 
The commissioning and operation of the instrument should comply with the relevant safety regulations and instructions to ensure the safety and correctness of the test process.
 
The control of test conditions should be strict, such as ambient temperature, humidity, etc. should meet the standard requirements and maintain consistency.
 
Data processing and analysis should be scientific, accurate and reliable, and statistical methods can be used for analysis and comparison.
 
The test results should be evaluated and judged in combination with the actual application to determine the final performance and quality of the fabric.
 
In short, to master the use method and skills of ICI pilling and threading friction testing machine, it is necessary to carefully read the relevant standards and instructions, carry out actual operation and practice, and continuously accumulate experience and knowledge before being able to use the instrument proficiently and obtain accurate and reliable results. The test results provide strong support for the research and development and production of fabrics.

Previous: International News: Apparel Textile Sourcing Canada
 N e x t   : The Best Approach to Footwear Universal Wear Tester for Every Personality Type