Standards:

ASTM D2130 Test method for determining the diameter of wool and other animal fibers by microprojection; BS 2043 Method for measuring fineness of hair fiber by projection microscope; DIN 53811 Inspection of textiles; Measurement of fiber diameter from longitudinal projection of microprojection ISO 137 Determination of the diameter of wool fibers - projection microscopy; IWSTM 24 Method for measuring the diameter of solvent extracts of wool and other animal hair IWTO 8-6

Applications:

G214 Precision Fiber Slicer is used to make accurate fiber cross-section specimens for further inspection or research under the microscope.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
(1) Preparation of fiber cross-sections for microscopic analysis.
(2) Diameter measurement of wool, animal fibers, synthetic fibers, and other textile filaments.
(3) Quality control in textile production lines to verify fiber uniformity and performance.
(4) R&D laboratories developing new fiber types or evaluating fiber modifications.
(5) Third-party testing laboratories and certification agencies performing material property verification.
(6) Educational demonstrations in textile and materials science courses.
(7) Comparative analysis of fiber batches for process optimization.

Product Information:

G214Precision Fiber Slicer is used to make the accurate fiber cross-sectional specimens for further inspection or research under the microscope. Insert a bundle of degreased fibers into the fine holes in the upper part of the micro-tome. The insert media is suitable for fiber bundles and can be dried. The fiber bundle is placed on the ejectorand the micrometer is used to determine the desired fiber sample thickness, and the slices can be cut with blade.

1.Turn the micrometer o the bottom, unscrew the two screws on the cover, remove the cover, and pass the fiber through the small hole of the cover from below to expose a small section. Tighten the screws on the cover to push the push plate to the side of the small hole, press the fiber, lock the nuts on the push plate, adjust to the size you want to cut, drop the collodion, and cut the fiber along the cover with blade.
2.The slicer is an integrated design, which is mainly composed of base, sliding plate and dial. The structure is simple, compact and beautiful, and the loading is convenient and fast. It is easy to understand and cut the slices of various fibers cross section having a cross section of 10 um or more.

Application

G214 Precision Fiber Slicer is used to make accurate fiber cross-section specimens for further inspection or research under the microscope.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
(1) Preparation of fiber cross-sections for microscopic analysis.
(2) Diameter measurement of wool, animal fibers, synthetic fibers, and other textile filaments.
(3) Quality control in textile production lines to verify fiber uniformity and performance.
(4) R&D laboratories developing new fiber types or evaluating fiber modifications.
(5) Third-party testing laboratories and certification agencies performing material property verification.
(6) Educational demonstrations in textile and materials science courses.
(7) Comparative analysis of fiber batches for process optimization.

Standards

ASTM D2130 Test method for determining the diameter of wool and other animal fibers by microprojection;
BS 2043 Method for measuring fineness of hair fiber by projection microscope;
DIN 53811 Inspection of textiles; Measurement of fiber diameter from longitudinal projection of microprojection
ISO 137 Determination of the diameter of wool fibers - projection microscopy;
IWSTM 24 Method for measuring the diameter of solvent extracts of wool and other animal hair
IWTO 8-6

Major Features

Precision cutting available
The slicer is equipped with precision indexing plate, which can cut a section of 10 microns and has an accurate cutting size for testing and analysis.
Quick loading fixture
Sliding plate fixed seat of the slicer is fastened with quick-twist type nuts, which can be quickly installed, loading convenient, reliable and efficient.
Flexible and compact design
The flexible and compact design makes this tester easy to assemble, which can be installed and tested from the lab to the production line at anytime and anywhere

Technical Parameters

Trial mode: manual	Metal needle width: 1.5mm
Slide width:30	Metal needle thickness:0.8mm
Slide length:60mm	Weight:3kg
Slide thickness:3mm	Power supply:no
Slot width:1.5mm	Dimension:150mm*100mm*150mm

Operation Instructions:

1.Turn the micrometer wheel to the end.
2.Screw off the two screws on the cover, remove the cover.
3.Insert the fibre into the slot of the cover showing a small cut out.
4.Tighten the screws up, push the pushing plate to the side of the slot to compress the fibre, lock the nut on the plate.
5.Cut the fibre along the cover with the blade.
6.Turn the micrometer wheel until showing the required parameters.
7.Take drops of collodion on it.
8.Cut the fibre along the cover with the blade again.

Accessories

(1) Precision blades for slicing fibers.
(2) Quick-twist nuts for sliding plate attachment.
(3) Ejector plate for fiber specimen removal.
(4) Micrometer adjustment wheel for precise cutting thickness.
(5) User manual and product qualification certificate.

Maintenance Information

(1) Clean the blade and cutting area regularly to avoid residue build-up.
(2) Check and tighten micrometer and sliding components periodically.
(3) Store in a dry environment to prevent corrosion of metal parts.
(4) Handle blades carefully; replace if damaged or dull.
(5) Inspect quick-twist nuts and ejector plate for smooth operation.

FAQs

1. What is the main function of the Precision Fiber Slicer?
The Precision Fiber Slicer is designed to prepare accurate fiber cross-section specimens for microscopic inspection and research. By inserting degreased fiber bundles into the slicer and using a micrometer-controlled cutting mechanism, the instrument enables precise slicing of fiber cross sections. The prepared specimens can then be observed under a microscope for diameter measurement, structural analysis, and material evaluation, making the slicer suitable for laboratory research, quality control, and fiber performance assessment.
2. How does the Precision Fiber Slicer perform fiber cutting? (Long Answer)
The slicing process is carried out manually using a micrometer and blade system. The fiber is first inserted through the slot or small hole in the cover, leaving a small section exposed. After tightening the cover screws, the pushing plate compresses and fixes the fiber securely. The micrometer wheel is then used to adjust the desired cutting thickness, allowing precise control of the section size. Collodion is applied to stabilize the fiber bundle, and the blade is used to cut along the cover. This process enables the preparation of fiber cross sections with thicknesses of 10 μm or more, ensuring consistent and accurate specimens for microscopic analysis.
3. What types of fibers and applications are suitable for this slicer?
The Precision Fiber Slicer is suitable for preparing cross sections of wool, animal fibers, synthetic fibers, and other textile filaments. It is widely used for fiber diameter measurement, quality control in textile production lines, research and development of new fiber materials, and comparative analysis of fiber batches. The slicer is also applicable in third-party testing laboratories, certification agencies, educational demonstrations, and performance verification laboratories involved in material property evaluation.
4. Which standards can be supported when using the Precision Fiber Slicer?
The Precision Fiber Slicer supports testing activities aligned with several international and industry standards related to fiber diameter and fineness measurement. These include ASTM D2130 for determining the diameter of wool and animal fibers by microprojection, BS 2043 for measuring hair fiber fineness, DIN 53811 for textile fiber diameter inspection, and ISO 137 for determination of wool fiber diameter by projection microscopy. It is also applicable to IWSTM 24 and IWTO 8-6 methods, supporting standardized microscopic evaluation in quality control and laboratory environments.