Standards:

GB 24541-2022. EN ISO 13997. EN 388-2016 6.3. ANSI ISEA 105-2016. ASTM F2992-15 and other standards.

Applications:

Used for testing the performance of materials and components in protective clothing design. A blade moves across the test specimen over a fixed distance to determine the magnitude of the perpendicular (normal) force required to cut through the specimen.

Product Information:

Product Features

Color touchscreen display and control, Chinese and English interface, menu operation mode;

Servo motor drive, high-precision ball screw to control movement speed;

Imported high-precision bearings with low friction and high accuracy;

No radial swing, stable operation without runout or vibration;

The core control component adopts a 32-bit microcontroller from STMicroelectronics;

Uses TDM specified blades and TDM specified chloroprene rubber.

Technical Parameters

Force range: 1.0N～200.0N;

Blade travel length across specimen: 0～50.0mm;

The specimen mounting area shall be curved with a bending radius of (38±0.5) mm. The mounting area length shall be greater than 110 mm, and the width along the curved surface shall be greater than or equal to 32 mm. The specimen holder shall allow multiple cutting tests on a single specimen with a minimum spacing of 10 mm;

Blade holder can firmly hold the blade with minimal deformation, and the exposed blade length is (12.0±0.5) mm. The blade shall face the curved surface of the specimen holder, and the blade surface shall form an angle of (90±2)° with the long axis of the specimen holder;

One set of weights: 20N, 8 pcs; 10N, 3 pcs; 5N, 1 pc; 2N, 2 pcs; 1N, 1 pc; 0.1N, 1 pc;

Blade hardness: (56～63) HRC;

Blade cutting edge length (70±0.5) mm, width (19±0.3) mm, thickness 0.91 mm;

Blade model: 88-0121;

Blade movement speed: (2.5±0.5) mm/s;

Cut-through force accuracy: 0.1N;

The applied force between the cutting blade and the specimen is maintained within ±5%;

Overall dimensions: 560×400×700 mm (L×W×H);

Weight: 40 kg;

Power supply: AC220V, 50Hz, 500W.

Configuration List

Main unit 1 set

Combined weights 1 set

Blades 1 box (10 pieces per box)

Certificate of conformity 1 pc

User manual 1 copy

Delivery note 1 pc

Acceptance sheet 1 pc

Product catalog 1 copy

Optional List

TDM specified blades 100 pcs/box

TDM original calibration blades 95 pcs/box

TDM specified rubber 1 pc

3M double-sided tape 1 roll

3M copper tape 1 roll