Standards:

Applications:

Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,

Product Information:

The Chrysler Flexing Tester is specifically designed to evaluate the flexing and folding performance of coated materials, such as vinyl-coated fabrics, leather, and similar materials.The tester is intended to assess the adhesion between the coating and the substrate, thereby evaluating the mechanical stability and durability of the coating. The equipment is designed in accordance with the Chrysler Laboratory Test Standard LP-463LB-9-01.This test is used to evaluate the coating adhesion performance of vinyl-coated fabrics, leather, and other coated materials. It can also be used to determine whether the material develops breakage, whitening, cracking, coating failure, or delamination between the coating and substrate during repeated flexing and folding.

Product Description:

A tester simultaneously tests four samples, including three bend specimens and a folded specimen.

When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,

the bending test. The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.

If possible, close the flat to exert the appropriate pressure. Bend specimens’ tension with a fixed weight. Tension must be controlled.

Technical Parameter:

1. Desktop;

2. Bending test stations: 3 stations;

3. Folding stations: 1 station;

4. Each sample holder may be separately provided on the specimen holder and tension;

5. The rod Working stroke: 70mm; (2.75in.)

6. Fixture spacing: (. 6in) 152mm;

7. Working frequency: 35 times / min;

8. The bending load test: Each sample 36N (8lbf.), Adjustable;

9. The folding load test: After the closure 641N (12lbf.);

10. The bend test specimen size: 76 × 203mm; (3 × 8in.)

11. The folding test sample size: 129 × 129mm; (5 × 5in.)

12. The feature can be manually reset electronic counters;

13. Electronic Counter: 6 digits;

14. Dimensions: 36 × 12 × 20 (length × width × height).

FAQ:

1. What does it test?

Tests the bending and flexing resistance of coated materials.

2. Which standard applies?

Chrysler LP-463LB-9-01.

3. What samples can be tested?

Vinyl-coated fabrics, leather, and coated materials.

4. What does it evaluate?

Cracking, whitening, peeling, and delamination after flexing.

5. Where is it used?

Automotive, leather, textile, and coating laboratories.