Mask Breathing resistance testing machine 10-point maintenance plan

Mask Breathing resistance testing machine is used to measure the inhalation resistance and exhalation resistance of respirators and masks under specified conditions. It is suitable for the relevant testing and inspection of ordinary masks, dust masks, medical masks, and anti-haze masks by national labor protection equipment inspection agencies and mask manufacturers.

 

1. Do not carry it from the bottom of the control box to avoid being crushed.

2. Please wipe the electroplating part with oil to prevent rust and keep bright.

3. After the test, please wipe the machine clean, and regularly oil each movable fulcrum to increase its service life and sensitivity. (The lubricating oil can be mixed with butter and a little oil)

4. Please wipe the panel (control box is the display) with a dry cloth to prevent it from getting wet, so as not to damage the IC electronic parts.

5. Please place all fixtures and joint accessories properly, and wipe the anti-rust oil to prevent rust.

6. After the machine is moved and placed, the foundation must be stably fixed and the level adjusted, and the fixing should be stable.

7. Please input power according to the mark. (Note that the phase of the input power must be correct, otherwise leakage will occur)

8. Please implement the grounding output according to the specification to avoid the danger of electric leakage and signal interference.

9. Do not pull out the plug during work.

10. Please operate and maintain it by professionals. In case of major problems, please notify the maintenance department of the company to send personnel to deal with it. Do not disassemble the parts without permission to avoid major losses.

 

Applicable standard:

GB 2626-2006 Respiratory protective equipment Self-priming filter type anti-particulate respirator 6.56.6

GB/T 32610-2016 Technical specification for daily protective masks

 

If you want to get the price of Mask Breathing resistance testing machine, please pay attention to QINSUN testing equipment manufacturer and leave us a message!