Tips for choosing an Ozone ageing chamber

The Ozone aging chamber plays an important role in the rubber industry, its main function is to simulate a small amount of ozone in the atmosphere, to test rubber products, to assess the anti-ageing properties of the products according to the results and to take measures to extend the life of rubber products. The cost of the relatively high, in the selection of the time must not be sloppy, otherwise it will cause waste or low some troublesome things. Here are a few tips for choosing an Ozone aging chamber.

 

The choice of environmental temperature: some products need to be tested in a temperature environment of minus degrees Celsius ozone resistance test, some are tested at room temperature, and some are tested at high temperatures. Users just need to understand their own products to test the common test temperature can be. It is important to note that testing at room temperature is more common. Conditions can be placed in the Ozone aging chamber premises equipped with air conditioning systems, it is recommended that users choose the test chamber with a refrigeration system when purchasing, to avoid the summer test, the temperature is too high resulting in inaccurate results.

Chamber volume selection: because the Ozone aging chamber chamber materials and ozone concentration control accuracy difficulties will have a corresponding increase, so as long as the test products can be accommodated on, too large chamber will only cause waste.

 

The most important point is that it is very important to choose a competent and experienced manufacturer. Experienced manufacturers give you more than just a piece of equipment, when you need to learn the technology they will also try to pass on to you.