You need to know the salt spray test chamber maintenance and maintenance skills

Salt spray testers require care and maintenance during use to ensure the accuracy of test data and the long-term stability of the equipment. The following salt spray test chamber maintenance and maintenance techniques:

 

Regular cleaning: after each use, the internal and external surfaces of the chamber should be cleaned in time, especially the nozzles and heaters and other parts susceptible to salt spray corrosion, to avoid corrosion or blockage.

 

Regular replacement of the liquid: salt spray test chamber in the brine liquid should be replaced regularly to avoid the brine concentration is too high or too low, affecting the test results.

 

Regular calibration: the parameters of the salt spray tester such as temperature, humidity and salinity should be calibrated regularly to ensure testing accuracy.

Regular inspection: the atomiser, heater, temperature and humidity sensor, liquid level sensor and other components of the salt spray tester should be inspected regularly to ensure that they work properly.

 

Replace filters: The filters in the salt spray tester need to be replaced regularly, and different filter models should be selected according to different test requirements.

 

Maintaining water quality: The water quality in the salt spray tester has a vital impact on the test results, so attention should be paid to replacing the water regularly.

 

Anti-corrosion coating: The metal parts inside the salt spray tester should be coated with an anti-corrosion coating to prolong its life.

 

Regular maintenance: for salt spray test chamber operating components such as fans, compressors, etc., should be regularly maintained to ensure its normal work.

 

Pay attention to the installation environment: salt spray test chamber should be installed in a ventilated, dry, non-corrosive gas environment, so as not to affect the test results and equipment life.

 

In short, the salt spray test chamber maintenance and maintenance is very important, only to keep the equipment in good condition, in order to get accurate and reliable test results and extend the service life of the equipment.